AGV K-3 SV Comic Motorcycle Helmet

Description

AGV K3 SV Comic Helmet Dont allow the name fool you, the AGV K3 SV isn’t a mildly up to date K3 helmet. As a substitute, AGV took the unique K3 and infused it with designs impressed by means of the highest of the road Pista GP and Corsa helmets. This has ended in a substantially more aggressive shell form, revised ventilation, a drop down sunshield and pockets for a communicator. Subject material-sensible the helmet stays in large part the similar, a Thermoplastic Resin shell, however this permits the K3 SV to stick with reference to the cost of the unique K3. And as though to sweeten the deal just a bit bit more, AGV has all of the standard cast colours to choose between along side plenty of very cool graphics and race replicas. HIR-TH Prime Resistance Thermoplastic Resin shell construction
2 shell sizes
4 EPS sizes optimized the usage of the FEM Finite Parts Research system
Ventilation system was once designed and optimized in a wind tunnel
4 entrance vents 3 at the forehead and one at the chin guard and 2 rear extractors vents
XQRS X-tra Fast Free up System visor mechanism for software-free removal and replacement of the faceshield in seconds
Faceshield mechanism options PVS Perimetrical Visor Seal for improved seal and coverage towards drafts and wind noise
GT 2 scratch-resistant, anti-fog polycarbonate visor with one hundred% coverage from UV rays
GT 2 face defend has improved peripheral imaginative and prescient way to the especially-formed profile of the aperture
Integrated drop-down Sun Visor ISV is scratch-resistant and may also be replaced simply and with out special tools
Removable breath deflector
Removable windproof chin strap protection
Fully removable and washer-friendly 3-d inner liner and cheek pads are sanitized and comprised of Dry-Comfort fabrics
Helmet profile has been contoured across the base to scale back the chance of collar bone injuries
Micrometrically adjustable chin strap retention system
Anti-robbery ring on strap
ECE 2205 and DOT approved
HIR-TH Prime Resistance Thermoplastic Resin shell building
2 shell sizes
4 EPS sizes optimized the usage of the FEM Finite Parts Research system
Ventilation system was once designed and optimized in a wind tunnel
4 entrance vents 3 at the forehead and one at the chin guard and 2 rear extractors vents

Helmet fitment is essential to the operation of a helmet during an impact. For the helmet to perform correctly during an impact, it must remain on the head.

Measuring the head is just a starting point for the entire sizing procedure.
A small metal tape measure or a cloth tape may be used to make your first measurement. You may also use a cord, which can subsequently be set against a measuring tape.

Take several measurements. The greatest measurement is the one you need to use.

Size Comparison Chart

Standard SizeHat SizeInchesCentimeters
4XS6 3/820 1/1651
3XS6 1/2 - 6 5/820 1/2 - 20 7/852-53
2XS6 3/4 - 6 7/821 1/4 - 21 5/854-55
XS72256
S7 1/82 3/857
M7 1/4 - 7 3/822 3/4 - 23 1/458-59
L7 1/223 5/860
XL7 5/8 - 7 3/424 - 24 3/861-62
2XL7 7/8 - 824 3/4 - 25 1/463-64
3XL8 1/8 - 8 1/425 5/8 - 2665-66
4XL8 3/8 - 8 1/226 3/8 - 26 3/467-68