- Amazon Customer Reviews
- Additional Information
- Helmet Fitment
Troy Lee Designs helmets have always had that one-off custom mystique. It could be the incredible graphics, the amazing attention to detail, or, in the case of the D3 Carbon Fiber Helmet, the sizing, which ditches the standard adjustment dials and straps in favor of a near-custom incremental sizing system. Given the helmet’s fit range, you’re virtually guaranteed a helmet that nestles snugly around your dome, regardless of whether the dome in question happens to be enormous, petite, or somewhere in between. The outline of the D3 is the same as the old D2, but Troy Lee rejiggered the shape to improve its fit and feel. There’s more EPS foam in the frontal areas, so you’ll be safer when you face plant, and the new 3D cheek pads are contoured to fit around your jaw and lovely mug for a more secure fit and better protection. Troy Lee also redesigned the visor and front trim, giving them smoother edges for a better look. Riding around with a head covered in 15lbs of protection isn’t really feasible, but the D3’s shell is made from a carbon composite material that’s incredibly strong and surprisingly light. Dual-density shock pads line the helmet and absorb smaller impacts, so you won’t crack the primary EPS liner in a little fall and have to pick yourself up a new lid. The D3’s removable, washable liner incorporates Coolmax and Dri-Lex technologies, which wick moisture, cool your dome, and fight odor. A host of 20 vents pulls air across your head and forces it out the back for efficient cooling, the adjustable visor is held in place with titanium hardwear (and can be swapped out for the included second option), and the corrosion-resistant D-ring fastener cinches the D3 around your chin to keep it from bouncing off when you go a little bit bigger than you planned.
Shell Material: carbon composite
Impact Foam: EPS
Ventilation: 14 intake vents, 6 exhaust vents
Visor: yes, adjustable, extra visor included
Full Face: yes
Helmet fitment is essential to the operation of a helmet during an impact. For the helmet to perform correctly during an impact, it must remain on the head.
Measuring the head is just a starting point for the entire sizing procedure.
A small metal tape measure or a cloth tape may be used to make your first measurement. You may also use a cord, which can subsequently be set against a measuring tape.
Take several measurements. The greatest measurement is the one you need to use.
Size Comparison Chart
|Standard Size||Hat Size||Inches||Centimeters|
|4XS||6 3/8||20 1/16||51|
|3XS||6 1/2 - 6 5/8||20 1/2 - 20 7/8||52-53|
|2XS||6 3/4 - 6 7/8||21 1/4 - 21 5/8||54-55|
|S||7 1/8||2 3/8||57|
|M||7 1/4 - 7 3/8||22 3/4 - 23 1/4||58-59|
|L||7 1/2||23 5/8||60|
|XL||7 5/8 - 7 3/4||24 - 24 3/8||61-62|
|2XL||7 7/8 - 8||24 3/4 - 25 1/4||63-64|
|3XL||8 1/8 - 8 1/4||25 5/8 - 26||65-66|
|4XL||8 3/8 - 8 1/2||26 3/8 - 26 3/4||67-68|